www.ivcdisplays.com

The 802.11a/b/g USB Wireless Network Interface is available only from IVC Displays. The addition of wireless Ethernet to you Windows CE panel PC.

Product Features
ˇ Compliant with IEEE 802.11a, 802.11b and 802.11g standards
ˇ Host interfaces:USB1.1/USB2.0
ˇ I2C EEPROM interface
ˇ Provide at least 4 GPIO
ˇ Integrated 3.3V to 1.8V regulator control circuit
ˇ Integrated RISC with internal ROM support
ˇ Smart power saving mechanism under USB1.1 connectivity
ˇ Package: 14mmX 14mm LQFP-128

Baseband Features
ť Design target to interface with Airoha:AL2230, VIA: VT6635(b/g RFIC), VT6636(a/b/g RFIC)
ť Programmable data rates: 6, 9, 12, 18, 24, 36, 48, 54 Mbps for OFDM; 5.5, 11Mbps for CCK; and 1,2 Mbps for barker modulation.
ť Programmable data rates: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps with OFDM; 5.5 and 11 Mbps with CCK; and, 1 and 2 Mbps with Barker modulation
ť Antenna diversity for better transmitting and receiving performance
ť RSSI status report by per receiving packet

MAC Features
ť Supports Infrastructure and AdHoc modes
ť Supports Multi-cast packet filtering function
ť Two 32-bit timers Unit: 1 us
ť Transmit loop-back mode support (Internal/External) to VIA solution
ť Supports BSS PCF
ť Supports IBSS ATIM window
ť SIMPLE TEST Mode Support by hardware. (Continuing Receiving/Continuing Transmitting)
ť Supports four MIB counters: RTSSuccessCount, RTSFailureCount, ACKFailureCount, and FCSErrorCount

Security Features
ť Supports WPA and WPA 2.0; Built-in hardware security engine for 802.11i 4.0. WEP (128-bit, 64-bit), TKIP, AES CCMP.